Trousers and Breeks Sizing

The garment measurements and recommended body measurements below are for a Regular size Flat Front Trousers and Breeks. Pleats will increase all widths except waist measurement. Please check your garment measurements shown on our photo guide against the chart to check fit

Custom Made to Order

Unless you have some special requirements the only trouser measurements required for made to order trousers are waist and inside leg or you can choose unfinished hem.

Custom Made to Measure

To be specific about the measurements A. to G. on our photo guide choose the Custom Made to Measure order form and enter your measurements where requested.  We also like to have a body seat measurement.

CHECKING YOUR TROUSERS/BREEKS MEASUREMENTS

Ideally we prefer for you to check your garment measurements, in particular the waist of the trousers as the actual measurement will often vary depending on the maker/brand.  Please measure a pair of well fitting trousers. Body waist measurements can be unreliable, although we do request a Body Seat Measurement for Custom Made to Measure.

MEASURE WAIST

Measure across the waistband and double it to give you your trouser waist size. Our trouser tailor will make the waistband actual measurement. (Please disregard size labels in off the peg trousers, as in some cases these are not accurate measurements)

MEASURE INSIDE LEG

Measure the inside seam from the crotch (fork) to the hem. Note: there is no standard inside leg on the charts below as all trousers and breeks are made to your required length.

MEASURE OUTSIDE LEG

Measure the outside seam from the bottom of the waistband to the hem. This is used to calculate your rise Outside Leg minus Inside leg = Rise.

TROUSERS

(scroll down for Breeks)

BREEKS